|
 |
|
Scalamobil
shown attached to
pediatric wheelchair with
e.motion wheels attached |
Climb
stairs in your own wheelchair!
STANDARD WHEELCHAIR INSTALLATION
|
Climb
stairs in your own wheelchair!
STANDARD WHEELCHAIR INSTALLATION
Most manual wheelchairs can accommodate the Scalamobil.
A simple bracket installation is all that is required!
Wheelchairs must meet the following criteria*:
|
- Seat
width of wheelchair must be be between 11"
and 23" wide. Seat to floor height must
be at least 16".
- Rear
wheels must be quick release style. (We can
covert in most cases.)
- Area
under seat must be free of devices such as ventilators,
oxygen tanks, etc.
|
|
 |
|
*If
your wheelchair does not meet these requirements,
please go to Transfer
Systems for information on alternative
ways to use the Scalamobil.
|
|
Using
the Scalamobil is fast and easy!
|
Roll
the Scalamobil under the wheelchair seat and fasten
to the brackets using the quick release pins.
Using the Scalamobil, slightly lift the wheelchair
up and remove the rear wheels.
Position the wheelchair at the steps and you are
ready to climb! |
|
After
replacing the rear
wheels, the wheelchair
can still be pushed with
the Scalamobil attached.
|
|
 |
|
